Toa TT-104B handleiding
Handleiding
Je bekijkt pagina 4 van 16
4
1 2 3 4 5 6 7
8
9
10
11
12
13 14 15
Day indicators
Second indicator (colon)
Channel indicators
Pause mode indicator
Time mode indicator
Day mode indicator
Clock display
4. NOMENCLATURE AND FUNCTIONS
[Front]
1. Program switch
Set this switch to OPERATION when setting a
clock for the current time or when letting the timer
work. Set the switch to PROGRAM to perform
programming. (Factory-preset: OPERATION)
Note: The timer does not operate if the program
switch is set to PROGRAM. Be sure to set it
to OPERATION normally.
2. Day setting keys
To program a current day of the week into the
timer, press this setting key with the ADJUST key
(4) pressed continuously. This key is also used to
register the day of the week of timer program.
3. Clock setting keys
Use these keys to set a clock for the current time.
To do this, press this setting key with the ADJUST
key (4) pressed continuously. These setting keys
are also used to set the time of the timer program.
Note: Each time this setting key is pressed, the
number over the setting key pressed
increases by one.
4. ADJUST key
Pressing this key continuously, press the Clock
setting key (3), Day setting key (2), or 00 SEC key
(5) to set a clock for the current time.
5. 00 SEC key
Use this key to adjust a clock to seconds. As soon
as the key is pressed with the ADJUST key (4)
pressed continuously, the clock is reset to zero
second and a new counting of second gets
started.
In this case, when the clock counting is between
30 and 59 seconds, the minute indication
automatically increases by one.
Note: This key works only when the program
switch is set to OPERATION.
6. CHANNEL keys
Use these keys to select the program output.
Pressing the key causes the corresponding
channel indicator on the right side of each key to
come on.
7. DAY mode key
This key is used to register a weekly program.
Press the key, and the Day indicators from
Monday to Sunday flash, allowing a day of the
week to be set with the Day setting key (2) under
each indicator.
8. PAUSE mode key
When it is desirable to stop the clock operation
temporarily on a certain day because that day
falls on a holiday, this can be accomplished by
using this key. After pressing this key (the Day
indicators flash), press the desired Day setting
key (2) to set the pause day.
9. TIME mode key
Press this key to register the clock program, and
the clock display flashes. Set time with the Clock
setting keys (3) under the display.
10. STORE key
Press this key to store the day of the week or
time set under the day, time or pause mode.
Note: No programs can be stored in a built-in
memory unless this key is pressed.
11. CANCEL key
This key cancels the stored day of the week or
time.
To cancel the day of the week, press the CHECK
key (12) to call up the day of the week and
cancel it with the CANCEL key.
Similarly, the stored time can be cancelled with
both the CHECK key (12) and CANCEL key.
Bekijk gratis de handleiding van Toa TT-104B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | TT-104B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1355 MB |
