Toa TS-D1100-MU handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 52
12
5.4. TS-D1000-CU Chairman Unit
[Top]
1
2 23 54
6
7
1. Monitor speaker
Speech signals from other Conference units and
other audio signals from the Master control unit are
output from this speaker.
Use the right-side Monitor volume control (10)
to adjust the volume. The sound volume of the
monitor speaker is attenuated whenever the unit is
being used for speaking.
Tip
Speaker output can be muted by way of browser
setting.*
2. Speech indicator (Red)
Remains lit while the microphone (6) is in use
(during speech).
3. Talk key
When this key is pressed, both the Speech indicator
(2) and the microphone’s Indicator (7) light, and the
microphone (6) turns on. Pressing this key again
turns o󰀨 both indicators and the microphone (6) .
4. Priority speech key
Gives speaking priority to the current speaker.
When this key is used for speech, no other
Conference units can be used. Sound from
external microphone, video conference inputs,
and PC being connected to the USB port are also
muted. The key has 2 di󰀨erent operating modes,
PTT mode and ALT.
Factory preset to PTT mode.
PTT mode: Microphone turns ON only while the
Talk key is pressed.
ALT mode: Microphone turns ON when the
Talk key is pressed, and OFF when
pressed again.
If Chime is set to sound, a chime tone sounds when
the key is pressed.
Factory preset to ON.
A browser can be used to set key operation and
chime volume.
For more information regarding key operation
and its actions, please refer to "Initiating Priority
Speech" on p. 20.
5. Power indicator (White)
Lights when the power is supplied.
6. Microphone
Use either the TS-D1000-M1 Standard microphone
or TS-D1000-M2 Long microphone.
7. Indicator (Red)
Lights when the microphone (6) is turned on (for
speech). This indicator also ashes when the
Conference unit connections are being checked.
(See "Connection Test" on p. 35.)
Note
The Conference unit’s ID number may be
duplicated if its indicator only ashes when power
is supplied. In such cases, turn on Switch 2 on the
Master control units Function setting switch (31)
for ID reset (p. 9) or reset the ID number using
the browser.*
* For details, please refer to the separate Instruction
Manual (Browser Settings), which can be
downloaded from the TOA DATA Library (https://
www.toa-products.com/international/).
Note: No microphone is supplied with the TS-D1000-CU.

Bekijk gratis de handleiding van Toa TS-D1100-MU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkToa
ModelTS-D1100-MU
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5846 MB