Toa RM-300MF handleiding
Handleiding
Je bekijkt pagina 21 van 150
21
20. Emergency Microphone
After the emergency mode is activated, press the
Talk key located on the side of the microphone
tomakeanall-zonecalloremergencybroadcast
overtheselectedzones(theRM-320Fisrequired
forzoneselection).
If an emergency attention tone* is enabled, a
ding-dong is broadcast when the Press-to-talk
switchispressed.Whethertousetheemergency
attention tone can be selected on the VM-3000
Setting Software. Refer to "10.2. Emergency
Control Input Settings; (2) Emergency attention
tone" in the separate VM-3000 Setting Software
instruction manual.
* This function can be used only when both
versionsofVM-3000VArmwareandVM-3000
Setting Software are 3.00 or later.
21. RM -320F Connector
Connect the RM-320F Fireman’s Microphone
ExtensionUnittothisconnector.
22. DIP Switch
Used to set the unit ID number and equipment
functions. (Refer to "DIP Switch Functions" on
p. 92.)
Switch 1 [MAINTENANCE]
Always set this switch to the OFF position. Default
setting:OFF
(Refer to "Maintenance Mode" on p. 94.)
Note
If this switch is set to ON, the unit is placed in the
maintenance mode and the front panel-mounted
Communication Failure indicator (9) lights green,
causing the unit not to work.
Switches 2, 3
Not used.
Defaultsetting:OFF
Switches 4, 5 [UNIT ID]
SetstheIDnumberoftheFireman’sMicrophone.
Defaultsetting:ON
(Refer to "Unit ID Number Settings" on p. 93.)
Switch 6 [COMPRESSION]
Enables/disablescompression.
Defaultsetting:ON
(Refer to "Compression Settings" on p. 93.)
Switch 7 [TERMINATION]
Sets the RM-300MF Fireman’s Microphone that
functions as a terminating unit.
Defaultsetting:OFF
( Refer to "Setting the Terminating RM-300MF
Unit" on p. 94.)
Switch 8 [CPU OFF]
Enables/disablestheCPUOFFfunction.
Defaultsetting:ON
(Refer to "CPU OFF Function Enable/Disable
Settings" on p. 94.)
23. Relay Connector
Connects to the relay connector (24) of the wall
mount bracket unit (accessory).
24 . Relay Connector
ConnectthecablefromtheRM-300MFFireman’s
Microphone to this connector.
25. Screw Terminal Block
RM Communication Line [DATA (+), DATA (–)]
A control/communication line between the RM-
300MF Fireman’s Microphone and the VM-
3240VA or VM-3360VA.
Audio Output Line [AUDIO OUT H/C]
AudiooutputlinefromtheRM-300MFFireman’s
Microphone to the VM-3240VA or VM-3360VA.
DC Power Supply Input [DC IN 24V +/–]
Power supply line from the VM-3240VA or VM-
3360VAtotheRM-300MFFireman’sMicrophone.
Shield [SHIELD]
Control line used by the VM-3240VA or VM-
3360VA for conrmation of RM-300MF
connections. Ensure that at least one shield is
connected.
Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-300MF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19502 MB |
Caratteristiche Prodotto
| Gewicht | 1100 g |
| Breedte | 200 mm |
| Diepte | 82.5 mm |
| Hoogte | 215 mm |
| Kleur behuizing | Wit |
