Toa RM-300MF handleiding
Handleiding
Je bekijkt pagina 17 van 150
17
53. Functional Ground Terminal
Hum noise may be generated when external
equipment is connected to the unit. Connecting
this terminal to the functional ground terminal of
theexternalequipmentmayreducethehumnoise.
Note: This ground is not for protective ground.
54. Control Output Terminals 1 – 8
[CTRL OUT 1 – 8, G]
Control output terminals for general broadcasts.
Operations assigned to each contact output are
determined by software settings. (For details,
refer to "Event Settings" in the separate software
manual.)
55. Control Input Terminals 1 – 8 [CTRL IN 1 – 8, G]
Control input terminals for general broadcasts.
Functions assigned to each contact input are
determined by software settings. (For details,
refer to "Event Settings" in the separate software
manual.)
56. Audio Input 4 Terminals [INPUT 4]
(VM-3240VA and VM-3360VA only)
Electronically-balanced600Ω,–10dB*/–50dB,
screwterminal.UseDIPswitch(40)forLINE/MIC
switching.
*0dB=1V
57. Remote VOL Terminals 1 & 2 [REMOTE VOL]
Not used.
58. Input 4 Volume Control
(VM-3240VA and VM-3360VA only)
Adjusts the audio input terminal 4’s (56) input
volume.
59.ExternalAmplierLinkConnector[EXT.PA
LINK]
Connects to the VP-2241 or VP-2421 standby
amplier’sPALinkconnector.
60. VM Link Connector [VM Link Out]
ConnectstotheVM-3240E’sorVM-3360E’sVM
Link In connector.
61. LAN Connector [LAN]
(VM-3240VA and VM-3360VA only)
Connects to a PC.
62. Remote Microphone Link Connectors 1 & 2
[RM1 LINK IN, RM2 LINK IN]
(VM-3240VA and VM-3360VA only)
Connect the RM-300MF Fireman’s Microphone
or RM-200M Remote Microphone to these
connectors.
Note
Only one RM-300MF can be connected to each
connector if the system is required to comply with
EN54-16.
63. DIP Switch (VM-3240E and VM-3360E only)
Used for unit ID and equipment settings.
DIP Switches 1 & 2 [LOCAL INPUT]
Notused.Defaultsetting:OFF
DIP Switches 3 – 6 [EXTENSION UNIT NO.]
Used for unit ID settings for the VM-3240E and
VM-3360E. (Refer to "Connections between VM
Ampliers"onp.133 for ID settings.)
Default settings: ON (Switch 3), OFF (Switches
4–6)
DIP Switch 7 [FIRMWARE]
SetthisswitchtoONtoenablermwareversion
updates, and OFF to prohibit the update.
Defaultsetting:ON
DIP Switch 8 [CONFIG]
Not used.
Defaultsetting:ON
64. Local Input Terminals [LOCAL INPUT]
(VM-3240E and VM-3360E only)
Local broadcast can be made when this terminal
is used in conjunction with the Control Input
terminals (55).
(This function can be used only when all the
versions of VM-3000VA rmware, VM-3000E
rmware, and VM-3000 Setting Software are
2.00 or later. For details, refer to "6. SYSTEM
SETTINGS; 6.8. Local Input Setting" in the
separate software instruction manual.).
65. Local Input Volume Control
(VM-3240E and VM-3360E only)
Adjusts the input volume of the equipment
connected to the Local Input terminal (64).
66. LAN Connector [LAN]
(VM-3240E and VM-3360E only)
Not used.
67. VM Link In Connector [VM LINK IN]
(VM-3240E and VM-3360E only)
Connect this connector to the VM-3240VA’s or
VM-360VA’s VM LINK OUT connector. When
using two or more VM-3240Es or VM-3360Es,
connect this connector to other VM-3360E’s or
VM-3360E’sVMLINKOUT.
68. Local Remote Microphone Link Connector
[LOCAL RM LINK IN]
(VM-3240E and VM-3360E only)
Not used.
69. PA Link Connector [PA LINK]
Not used.
Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-300MF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19502 MB |
Caratteristiche Prodotto
| Gewicht | 1100 g |
| Breedte | 200 mm |
| Diepte | 82.5 mm |
| Hoogte | 215 mm |
| Kleur behuizing | Wit |
