Toa RM-300MF handleiding
Handleiding
Je bekijkt pagina 13 van 150
13
1. Power Switch
Unit is switched between operating and standby
modes each time this switch is pressed. Power is
always supplied regardless of the switch setting.
2. Live Status Indicator (green) [POWER]
Remains lit while power is supplied.
* As long as the power is connected, this indicator
remains lit even if the power is switched OFF.
3. Evacuation Announcement Indicator (red)
Lights whenever an Evacuation announcement is
broadcast.
4.
Evacuation Announcement Key [EVACUATE]
Can only be used while in emergency broadcast
mode.
Pressing this key plays back the recorded
Evacuation announcement, which is broadcast
from the speaker output(s) selected with the
Output Selection key (33). To stop an Evacuation
announcement, hold down this key for 3 seconds
or more during emergency broadcast.
5. Emergency Activation Switch / Emergency
Indicator (red) [EMERGENCY]
Pressing this switch while it is unlit causes it to light
while switching output to emergency broadcast
mode. (No automatic announcements are made.)
When an emergency broadcast is activated by
a control input other than this switch or by the
Fireman’s Microphone, the switch ashes and a
buzzersounds,disablingfrontpaneloperation.
While ashing, this switch functions as an
emergency activation acknowledgement switch.
Pressing this switch while it is ashing causes it
tostaylit,stoppingthebuzzerandenablingfront
panel operation. In any case, this switch goes out
once the emergency broadcast is reset.
Steady ON: Lights when the emergency mode is
activated either by this switch or by
otherconnectedexternalequipment
and subsequently acknowledged,
and remains lit until the emergency
mode is reset.
Flashing: Flashes when the emergency mode
is activated by external equipment
other than this switch.
6. Menu Key [MENU]
During emergency broadcasts:
Cannot be used.
During general broadcasts:
Displays the setting item menu.
During settings:
Selects the setting item.
7. OK Key [OK]
During failure indication:
Stops the buzzer when a failure is detected by
the surveillance function (functioning as a failure
acknowledgment key).*
During setting:
Functionsasaconrmationkey.
*
For more information on surveillance functions,
refer to p. 52.
8. — (Minus) Key [—]
Decreases setting value numbers.
9. Cancel Key [CANCEL]
Returns the display to the previous screen during
settings.
Pressing this switch when a failure occurs reverts
the unit back to normal mode. (Refer to "Failure
reset operation" on p. 58 and "Examples of
Failures and Their Counter-Operations" on p. 60.)
10. + (Plus) Key [+]
Increases setting value numbers.
11. LCD
Backlitduringunitoperation.
During emergency or general broadcasts:
Displays operation and failure information.
During settings:
Used to perform settings.
12. BGM Selection Key [BGM]
DisplaystheBGM(backgroundmusic)selection
screen on the LCD (11). The display switches
betweenthesettingscreensforTreble,Bass,etc.
with each depression of this key. (Refer to "BGM
Settings" on p. 90.)
13. BGM Volume Control [BGM]
AdjuststheBGMinputvolume.
14. Input Selection Keys [INPUT 1 – 3]
Display key’s corresponding setting screen on
the LCD(11).The displayswitches between the
setting screens for Treble, Bass, etc. with each
depression of the selected key. (Refer to "Inputs
1–3Settings"onp.88.)
15. Input Volume Controls [INPUT 1 – 3]
AdjusttheinputvolumeforInputs1–3.
16. Master Volume Control [MASTER]
Sets the output volume for the entire system.
Bekijk gratis de handleiding van Toa RM-300MF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-300MF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19502 MB |
Caratteristiche Prodotto
| Gewicht | 1100 g |
| Breedte | 200 mm |
| Diepte | 82.5 mm |
| Hoogte | 215 mm |
| Kleur behuizing | Wit |
