Toa RM-210F handleiding
Handleiding
Je bekijkt pagina 60 van 77
3 -11
Chapter 3
OPERATION
GF
1F
2F
3F
Emergency
sequence
Phase 1
General-purpose
broadcast
restored.
Emergency
sequence
Phase 2
Continuous
BGM
GF
Building ABuilding B
1F
2F
3F
4F
5F
6F
BGM
GF
1F
2F
3F
Evacuation
GF
Building ABuilding B
1F
2F
3F
4F
5F
6F
Evacuation
Evacuation Evacuation
Evacuation
Evacuation
Evacuation
Evacuation
Evacuation
Evacuation
Evacuation
Alert
Alert
Alert
GF
1F
2F
3F
BGM
GF
Building ABuilding B
1F
2F
3F
4F
5F
6F
BGM
Emergency restoration signal
Signal added to A-2F and A-4F
Step 3. Following this, the sensors
installed on A-2F and A-4F detect
irregularities and the re alarm
system transmits a control signal
to the control input.
Broadcast zones are added, and
the alert message is also broadcast
to A-2F and A-4F, as well.
Step 4. After the set 5-minute time
interval elapses, the message is
automatically switched from Phase
1 to Phase 2.
Broadcast zones change to the
"entire zone" and the evacuation
message is broadcast to the entire
area, and BGM stops.
The evacuation announcement
continues until the Remote
Microphone's Reset key is
pressed or a restoration signal is
transmitted from the connected
realarmsystem.
Step 5. The re alarm system transmits
a restoration control signal to the
control input.
The emergency mode is terminated
and the broadcast reverts to
general-purpose broadcast mode,
restoring BGM output.
Bekijk gratis de handleiding van Toa RM-210F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | RM-210F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8488 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 350 g |
| Breedte | 110 mm |
| Diepte | 110 mm |
| Hoogte | 215 mm |
