Toa IP-A1PA12 handleiding
Handleiding
Je bekijkt pagina 13 van 20
13
To amplifier, etc.
From microphone or
other sound sources
Line output terminal
LINE/MIC input terminal
DIP switch
When the connected unit has an unbalanced input, make the connections as follows:
IP-A1PA12
Connected unit
H
C
HOT (H)
Cold (C)
Earth (E)
Shield Shield
IP-A1PA12
DIP switch
1 2 3
LINE
MIC
OFF
ON
[
PHANTOM
]
0 dB
-20 dB
[
PAD
]
[Factory default setting]
Decrease Increase
LINE/MIC input
volume control
LINE/MIC input signal indicator
VOLUME
IP-A1PA12
[DIP switch settings]
Set the DIP switch according to the audio device to be connected.
Input device DIP switch settings
Line level sound source
1 2 3
1: LINE
2: 0 dB [PAD]
3: OFF [PHANTOM]
(Default settings)
Dynamic microphone
1 2 3
1: MIC
2: 0 dB [PAD]
3: OFF [PHANTOM]
Electret condenser
microphone
1 2 3
1: MIC
2: –20 dB [PAD]
3: ON [PHANTOM]
IP-A1MP
microphone panel
1 2 3
1: LINE
2: 0 dB [PAD]
3: ON [PHANTOM]
Note
Please change DIP switch settings
while the power is o.
[LINE/MIC input level adjustment]
Set roughly the volume of individual
connected devices by DIP switch. After that,
use the LINE/MIC input volume control for
ne volume adjustments.
Adjust the level so that the LINE/MIC input
signal indicator lights green, not red.
Note
Rotate the input volume control screw using
an appropriate screwdriver. When rotating,
do not press on the screwdriver with too
much force, so as to avoid damage to the
adjuster.
Bekijk gratis de handleiding van Toa IP-A1PA12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | IP-A1PA12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2020 MB |
