Handleiding
Je bekijkt pagina 25 van 34
25
Cable
If Cable option is selected, the TV will search for digital cable and analogue broadcasts. If any, available operator
options will be listed on the Select Operator screen. Otherwise, this step will be skipped. You can select only one
operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed.
On the next screen select Scan option to start a search or select Skip Scan to continue without performing
a search. If Scan is selected a conguration screen will be displayed next. Scan Mode, Frequency (kHz),
Modulation, Symbol Rate (kSym/s), Network ID options may need to be set. To perform a full scan set the
Scan Mode as Full/Advance if available. Depending on the selected operator and/or Scan Mode some options
may not be available to be set. Once you are done with setting available options, press the Right directional
button to proceed. The TV will start to search available broadcasts.
Satellite
If Satellite option is selected, Satellite Type screen will be displayed next. Preferred Satellite and General
Satellite options will be available. Select one and press OK to proceed.
Note: Preferred Satellite and General Satellite options may not be available depending on the selected country.
In this case the DVBS Conguration Setting screen will be displayed after selecting the tuner mode as Satellite. If
Preferred Satellite option is selected, next screen will be Select Operator screen. You can select only one operator
from the list. Highlight the desired operator and press OK or the Right directional button to proceed. Some of
the following options may be preset depending on the selected operator in this step. Check the parameters
before proceeding and adjust if necessary.
For Austria and Germany Load channel list function, under search option General Satellite, is available.
DVB–Sconguration
DVB-S Conguration Setting screen will be displayed next. First Antenna type should be set (This option may be named
as Satellite type depending on the country selection.) Universal, Single Cable and Jess Single cable options are available.
Set the Antenna Type as Universal for Direct and DiSEqC satellite systems. If you set the antenna type as Universal, press
the Right directional button to proceed to the next step. If the antenna type is set as Single Cable or Jess Single cable,
there will be three more additional options on the DVB-S Conguration Setting screen: Tuner, Band frequency and User
Dened. User Dened option will be available if the Band frequency is set as User Dened. Set these options if available
and press the Right directional button to proceed. Depending on the country and satellite type selections you made in
the earlier steps of the initial setup process, Load Preset List screen may be displayed next. Highlight Load Preset List
and press OK or the Right directional button to proceed with the SatcoDX installation. You can also skip this step by
selecting Skip option. After the parameters on the DVB-S Conguration Setting screen are congured according to your
environment and pre-set list installation preference is selected the next step may be Select Satellite screen. You may be
able to set up dierent satellites depending on the selected antenna type and operator in the previous steps. Highlight
the desired satellite option and press OK to set the parameters (If you have a Direct satellite system, DiSEqC Set option
should be set as DiSEqC A.). The Satellite Status of the rst satellite option will be set as On.
In order to congure other settings of the satellite and to enable scan this option should be set as On rst. Press
Back button and select the next satellite you want to set. After you completed the conguration changes, press
the Right directional button to proceed.
If Load Preset List option is selected in the previous step next steps will be skipped and the preset channel list
installation will start. If the correct satellite has not been selected for SatcoDX installation, a warning dialogue
will be displayed on the screen. The satellite/s that can be selected will be listed. Press OK to close the dialogue
and then set the satellite accordingly.
Channel Scan screen will be displayed next. Select Scan and press OK or the Right directional button to proceed with
the scanning congurations. Select Skip Scan to proceed without performing a scan and complete the initial setup.
DVBS Scan Congure screen will be displayed next if Scan option is selected. Following options will be available:
Scan Mode and Channels. You can choose to perform a full scan or a network scan. Set the Scan Mode accordingly.
If you are going to perform a network scan, make sure that you have adjusted the Frequency, Symbol Rate
(kSym/s) and Polarisation parameters under the Transponder option accurately on the Satellite Setup screen. You
may not be able to change the Scan mode setting depending on the previous selections. If the Channels option
is set as Free encrypted channels will not be installed. Additional options may also be available depending on the
selected operator, congure these settings according to your preferences. Once you are done with setting the
available options, press the Right directional button to start scan while Scan Mode or Channels is highlighted.
While the search continues you can press the Back button to cancel the search. The channels that have already
been found will be stored in the channel list. When the initial setup is completed, results will be displayed. Press
OK to nish the setup. Home Screen will be displayed. You can highlight Live TV app and press OK to switch to
Live TV mode and watch.
Bekijk gratis de handleiding van Thomson 50UA5S13, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thomson |
| Model | 50UA5S13 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 4305 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht verpakking | 11700 g |
| Bluetooth | Ja |
| Beeldschermdiagonaal | 50 " |
| Resolutie | 3840 x 2160 Pixels |
