Handleiding
Je bekijkt pagina 17 van 92
HomeConnect® en-us
17
HomeConnect®
12 HomeConnect®
HomeConnect®
This appliance is network-capable. Connecting your
appliance to a mobile device lets you control its functions
via the HomeConnect® app.
The HomeConnect® services are not available in every
country. The availability of the HomeConnect® function
depends on the availability of HomeConnect® services in
your country. You can find information on this at:
www.home-connect.com.
To be able to use HomeConnect®, you must first set up
the connection to the WLAN home network (Wi-Fi
1
) and to
the HomeConnect® app.
After switching on the appliance, wait at least 2minutes
until internal device initialization is complete. Only then
should you set up HomeConnect®.
The HomeConnect® app guides you through the entire
registration process. Follow the instructions in the
HomeConnect® app to implement the settings.
Tip:Follow the instructions in the HomeConnect® app as
well.
Notes
¡ Also note the safety information in this instruction
manual and ensure that it is also observed when
operating the appliance using the HomeConnect® app.
→
"Safety", Page4
¡ Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the HomeConnect® app during this time.
12.1 Setting up the HomeConnect® app
1.
Install the HomeConnect® app on your mobile device.
2. Start the HomeConnect® app and set up access for
HomeConnect®.
The HomeConnect® app guides you through the entire
registration process.
12.2 Setting upHomeConnect®
Requirements
¡ The HomeConnect®app is installed on your mobile
device.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
1. Open the HomeConnect® app and scan the following
QR code.
RFTH1T01
2. Follow the instructions in the HomeConnect® app.
12.3 Remote diagnostics
Customer Service can access your appliance via Remote
Diagnostics if you ask them to do so, if your appliance is
connected to the HomeConnect® server and if Remote
Diagnostics is available in the country where you are using
the appliance.
Tip:Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com.
12.4 Data Protection
Please read this information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance
transmits the following types of data to the
HomeConnect® server (initial registration):
¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
¡ Security certificate of the Wi-Fi communication module
(to ensure a secure data connection).
¡ The current software and hardware version of your
home appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the HomeConnect®
functions for use and is only required when you want to
use the HomeConnect® functions for the first time.
Notes
¡ Please note that the HomeConnect® functions can only
be used in conjunction with the HomeConnect® app.
Information on data protection can be retrieved in the
HomeConnect® app.
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
Bekijk gratis de handleiding van Thermador T30IB100SP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thermador |
| Model | T30IB100SP |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 14348 MB |