Theben TR 642 top3 RC 12-24V BLE handleiding

Niet gecategoriseerd

Theben

11 pagina's

PDF beschikbaar

Handleiding

 Use the + or – keys to enter hour, minute, second(8:05)

and conrm by pressing OK. PULSE DURATION is displayed.

 Use the + or – buttons to enter the duration of the pulse

in minutes and seconds (5 sec) and conrm with OK. The

display shows EVERY DAY.

 Select MONDAY with u and conrm with OK.

 Continue with u until SAVE is displayed.

 Conrm with OK.

Cycle programming

In addition to turn-on and turn-off times (switching time)

and short time pulses (pulse), cycle times (cycle) can also be

programmed. The pulse length (+ pulse pause) is limited to 17

h, 59 min, 59 s.

L Cycle times are cyclically repetitive time functions such as

fan controls, fountains, etc.

Example: Switch on water rinsing Monday from 8:00 to

20:30 every 15 min. for 20 s (8:00:00–8:00:20 On; 8:15:00–

8:15:20 On; 8:30:00–8:30:20 On, etc.)

Cycle programming:

•

Start cycle: Monday 8:00

•

Pulse duration: 20 s

•

Pause duration (pause): 14 min and 40 s

•

End cycle: Monday 20:30

L Observe the maximum number of electrical switching

cycles when using the cycle function.

CHANNEL C1

CHANNEL C2

PROGRAM

u u u

NEW

CHECK-MOD-

IFY-DELETE

P0 DELETE

ALL

END

FREE 800

START CYCLE

HOUR

MINUTE

MONDAY

PULSE

LENGTH

PAUSE

ENDLESS WITH END

STANDARD

EXTRA 1 P1

EXTRA 2 P2

DELETE ALL

SWITCH

PULSE

CYCLE

...

STOP CYCLE

...

SAVE

 Press MENU.

 Select PROGRAM, conrm with OK.

 Select CHANNEL, conrm with OK.

 Select STANDARD P0, conrm with OK.

 Select NEW, conrm with OK.

 Select CYCLE with u, conrm with OK. START CYCLE is

displayed, conrm with OK.

 Use the + or – buttons to enter hour, minute, day (8:00

Monday) and conrm with OK.

 Enter PULSE LENGTH (20 s), conrm with OK.

 Enter pause duration PAUSE (14 min and 40 s), conrm

with OK. The display shows WITHOUT END.

 Select WITH END with u, conrm with OK. STOP CYCLE is

displayed, conrm with OK.

 Enter end times of the cycle (20:30) and conrm with OK.

PROGRAM: Program switching time in special

program 1–16

The rule for special programs is: the higher the number, the

higher the priority. Special program 16 has the highest, spe-

cial program 1 the lowest priority.

Each special program has an arbitrary number of date ranges

available.

L A special program only becomes active when at least one

date range has been set and it is not superimposed by

another special program with a higher priority during this

period.

At the start and end of each date range the hour can also

be entered to ensure that the changeover to the respective

special program occurs at each full hour.

The following date ranges can be set in parallel:

– Fix date (once)

– Fix date every year (repeating)

– Easter rule, or the Orthodox Church rule (81 days before ...

174 days after Easter) and all Christian/religious holidays

(Whitsun, Corpus Christi etc.)

– Chinese New Year (20 days before ... 20 days after the

Chinese New Year)

– Date with seriial pattern (date series): Start and end are

defined and the start is repeated after an adjustable num-

ber of days (after 200 days at the latest)

– Weekday rule (e.g. every 3rd Wednesday in September)

L An extra date range must be assigned to the special

program for it to become active.

Bekijk gratis de handleiding van Theben TR 642 top3 RC 12-24V BLE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.