Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 38 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
5.3.5.2 The "RMG 8 T channel Cx: configuration options" parameter page
Table 12
Designation
Values
Description
Channel function
Switching On/Off..
On/off time delay..
Pulse function..
Staircase light time switch with
forewarning function..
Flashing..
Determines the basic functionality of the
channel.
Activation of function via
Switch object
The channel is operated via a 1-bit
object.
Exceeding the threshold
The channel is operated through
exceeding a 1 or 2-byte threshold.
See below: The „Threshold“ parameter
page
Activate block function
Yes..
The block function can be individually
adjusted.
The relevant parameter page is shown.
no
No block function.
Activate scenes
Yes..
no
Should scenes be used?
Participation in central
objects
no
Central objects are not taken into
account.
at Central switching, Permanent
On, Permanent OFF
only in central continuous ON
only in central continuous OFF
only in central switching
only in central switching and
continuous ON
only in central switching and
continuous OFF
only in central permanent On
and permanent OFF
Which central objects are to be taken
into account?
Central objects enable the simultaneous
switching on and off of several channels
with one single object.
Version: May-14 (Subject to change) Page 38 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
