Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 31 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
• Object 249 "Central safety frost"
This object can be used to move all drives which are configured for it into a defined position
when there is a central frost alarm.
Works on the following devices: JMG 4 T, JME 4 T, JME 4 S, RMG 8 T*, RME 8 T*.
• Object 250 "Version of bus coupling unit"
For diagnostic purposes only.
Sends the bus coupling unit software version after reset or download.
Can also be read out via the ETS.
Format: Axx Hyy Vzzz
Code
Meaning
xx
00 .. FF = Version of application without dividing point (10 = V1.0, 11 = V1.1,
etc.).
yy
Hardware version 00..99
zzz
Firmware version 000..999
EXAMPLE: A16 H03 V014
- ETS application version 1.6
- Hardware version $03
- Firmware version $14
*Only applies to blinds channels.
Version: May-14 (Subject to change) Page 31 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
