Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 30 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
• Objects 244, 245, 246 "Central safety 1, 2, 3"
The safety objects allow a specific response of the drives to a particular situation with a high
priority. These objects can, for example, be linked with 3 differently placed wind sensors
(weather stations).
Example:
A safety object is linked to a wind sensor.
A drive to which a textile sun protection device is connected is configured to react to this
safety object.
The operating condition is normal as long as a “0” is present.
In the event of a storm, the wind sensor sends a "1" to the safety object and the sun protection
is immediately moved to the configured safety position.
Notes:
1. A safety object must only be actuated by one device, as otherwise conflicting
commands could cancel each other out.
2. With a request for safety objects e.g. via the ETS function "Read value":
If the "Safety on" status arises through cyclical monitoring, the object value remains at
0.
3. The safety statuses must be reinitialized after download.
Works on the following devices: JMG 4 T, JME 4 T, JME 4 S, RMG 8 T*, RME 8 T*.
• Object 247 "Central Up/Down"
This object can be used to centrally control all drives which are configured for it.
For example, all of the roller blinds on one facade can be raised or lowered at the same time
with one push button
0 = raise
1 = lower
Works on the following devices: JMG 4 T, JME 4 T, JME 4 S, RMG 8 T*, RME 8 T*.
• Object 248 "Central safety rain"
This object can be used to move all drives which are configured for it into a defined position
when there is a central rain alarm.
Works on the following devices: JMG 4 T, JME 4 T, JME 4 S, RMG 8 T*, RME 8 T*.
*Only applies to blinds channels.
Version: May-14 (Subject to change) Page 30 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
