Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 23 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
• Object 3 "Call up/save scene"
Only available if the scene function has been activated (configuration options parameter
page).
This object can be used to save and subsequently call up scenes.
Saving stores the channel status.
It does not matter how this status is produced (whether via switch commands, central objects
or the buttons on the device).
The saved status is restored when it is called up.
All scene numbers from 1 to 64 are supported.
Each channel can participate in up to 8 scenes.
See appendix: Scenes
• Object 4 "Lock scenes = 1, Enable scenes = 1"
Locks the scene function with a 1 or a 0 depending on the configuration.
As long as it is locked, scenes cannot be saved or called up.
• Object 5 "On/Off feedback"
Reports the current channel status.
The status can also be inverted depending on configuration.
• Object 6 "Time to next service, operating hours feedback "
Only available if the hour counter function
has been activated (configuration options parameter page).
Reports, depending on selected Type of hour counter (Hour counter and service parameter
page), either the remaining period to the next service or the current status of the hour counter.
• Object 7 "Service required"
Only available if the hour counter function has been activated (configuration options
parameter page) and Type of hour counter = Counter for time to next service.
Reports if the next service is due.
0 = not due
1 = service is due.
Version: May-14 (Subject to change) Page 23 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
