Thames & Kosmos Robotics Smart Machines: Tracks & Treads handleiding

Niet gecategoriseerd

Thames & Kosmos

64 pagina's

PDF beschikbaar

Handleiding

› › › TIPS AND TRICKS

Here are a few tips for

assembling and using the

models. Read them carefully

before starting.

A. Pay attention to the hole

alignment!

It is very important that you pay

close aention to the alignment of

the holes in the gear wheels. Make

sure that you insert the shaft pins

into the correct holes and that the

gears are oriented exactly as shown

in relation to each other and to the

model. Otherwise, the robots will

not move properly.

B. The part separator tool

In the box, you will ﬁnd a lile

yellow tool called the anchor pin

lever. End A of the part separator

tool makes it easy to remove anchor

pins from the frames.

C. Gear wheels

The models will often have several

gear wheels installed in a row. In

order for the models to work well,

these gears will have to mesh well.

Otherwise, the force from one gear

wheel won’t be properly transferred

to the next.

D. How to insert batteries

into and remove batteries

from the Bluetooth battery

box

Slide the transparent cover open.

Insert brand new, disposable AA

(1.5-volt) baeries into the baery

compartment. Rechargeable AA

(1.2-volt) baeries may not provide

enough power to operate all the

models suﬃciently. Ensure the

baeries are inserted correctly as

indicated by the plus-minus polarity

markings (+ and -). Close the

compartment by sliding the cover

back on.

Hole A

Hole

Hole C

Bekijk gratis de handleiding van Thames & Kosmos Robotics Smart Machines: Tracks & Treads, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.