Thames & Kosmos Robotics: Smart Machines 5-in-1 Buildable Drone with HD Camera handleiding
Handleiding
Je bekijkt pagina 9 van 28
You can program your drone to follow a
predetermined set of instructions in the drone
programming mode. Here’s an overview of the
controls in this mode:
1. Return to main menu
2. Take photo: When the program is running, you
decide when the drone takes a photo by pressing
this button.
3. Take video: Manually start and stop the video
capture when the program is running.
4. Program sequence area: This is where the
active program commands are arranged in
order from left to right.
5. Change the LED status
6. Emergency stop
Program commands:
7. Rotate counterclockwise 90 degrees
8. Rotate clockwise 90 degrees
9. Go up half a meter (about 1.5 feet)
10. Go down half a meter
11. Go left half a meter
12. Go right half a meter
13. Go forward half a meter
14. Go backward half a meter
15. Start (run) the program
16. Stop the program
17. Save the program. Saved programs can be
accessed via the program menu (20).
18. New command steps are entered into the blank
space in the program sequence area (18).
Here’s an example that shows you how to write a
program:
A. In programming mode, the program always
starts with the take off command (19).
B. Press the go up button to enter a command into
the program that will tell the drone to go up half
a meter (21).
C. Add a go forward command (22).
D. Add another go forward command, and then a
go right command (23).
E. Add a rotate clockwise command (24).
F. After tapping start to run a program, you need
to swipe the unlock bar (25) to confirm that you
want to run the program and it is safe to do so.
Make sure you follow all of the safety rules on
page 2 and the general flying instructions on
page 11.
A
1
2
3
5
4
18
19
9
13
15
16
6
10
14
7
11
8
12
17
20
21
22
23
24
25
B
C
D
E
F
PROGRAMMING THE DRONE WITH THE APP
7
Using the App
Bekijk gratis de handleiding van Thames & Kosmos Robotics: Smart Machines 5-in-1 Buildable Drone with HD Camera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Robotics: Smart Machines 5-in-1 Buildable Drone with HD Camera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12562 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Yellow |
| Gewicht | 635 g |
| Breedte | 236 mm |
| Diepte | 229 mm |
| Hoogte | 84 mm |
