Thames & Kosmos Robotics: Smart Machines 5-in-1 Buildable Drone with HD Camera handleiding

Niet gecategoriseerd

Thames & Kosmos

28 pagina's

PDF beschikbaar

Handleiding

Here is an overview of the controls in drone

remote control mode. Use this mode with the

drone only. Read the safety rules on page 2 and the

flying instructions on page 11.

1. Return to main menu

2. Take photo

3. Take video

4. Motion control: Steer the drone by moving your

smart device

5. Flight speed setting: Set the speed at which the

drone moves.

6. 360 flip: The drone will do a somersault in the

air. Flight speed must be set to medium or fast.

7. Track flight route: Draw a path in the app for

your drone to follow.

8. LED status: Controls the light on the drone

9. Setup menu:

10. Rotate screen

11. Split screen (helpful for VR viewing)

12. Reset the drone’s balance

13. Show/hide remote control interface

Drone remote controls (B):

14. Rotate counterclockwise

15. Rotate clockwise

16. Go up (away from floor)

17. Go down (toward floor)

18. Auto take off: Press this when you want

your drone to take off and hover

19. Selfie mode: Speak the voice command

“photo” and the drone will take a picture

20. Auto landing: Press this when you want

your drone to lower itself back to the floor

21. Go left

22. Go right

23. Go forward

24. Go backward

25. Rotation (yaw) trim: If your drone keeps

turning to one side, use this to compensate

26. Emergency stop

27. Left/right trim: If your drone keeps drifting

to one side, use this to compensate

28. Forward/backward trim: Same as left/

right trim, but on the forward/backward axis

Remote controls for the other models (C): Use

these controls to power the motors for the other

models you can build in this kit.

Find your photos and videos in the media folder (D).

USING THE APP

Bekijk gratis de handleiding van Thames & Kosmos Robotics: Smart Machines 5-in-1 Buildable Drone with HD Camera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.