Thames & Kosmos Renewable Energy Lab handleiding

Niet gecategoriseerd

Thames & Kosmos

36 pagina's

PDF beschikbaar

Handleiding

Renewable Energy Lab

INTRODUCTION TO THE COMPONENTS

A. The EMS (green energy management

system) is a device capable of transmitting

and monitoring electrical power. It can

measure voltages ranging from 0.01 to 30

volts (V) and currents from 0 to 999

milliamperes (mA). It features two input

terminals and one output socket at the top.

When two easy wire connectors are

connected to the two input terminals

separately, the device measures the

combined voltage of both (series

connection). However, if both easy wire

connectors are connected to the same input

terminal, the device measures the higher

voltage of the two (parallel connection).

B The angle of the 45V solar panel can be adjusted according to the position of the light source. It converts

solar energy or the energy from a 60-watt halogen lamp into electricity, simulating the power generation

process of a solar power plant.

 The generator/motor can switch between

generator () or motor (M) modes using a

switch. In generator mode, rotating the axle

generates electricity, simulating the power-

generation process of a hydroelectrc power

plant or fossl fuel plant In motor mode, the

axle rotates simply when electricity is supplied.

Additionally, the generator/motor features a gear

ratio switch, allowing you to switch between two

gear ratios: 35X and 70X.

• Toggle the switch to turn on

the GEMS. Please turn off

the power after use.

• Avoid touching the screen. Use a microfiber cloth to gently wipe off dust

and dirt.

• Both Input Sockets 1 and 2 can be used. When both sockets have power

input, the displayed voltage value will be the sum of both.

• To activate the output socket, turn on the output switch. The current

value will only be displayed when there is power consumption.

• The 4.5V solar panel can

be adjusted to 11 different

angles, in 18° intervals.

• The plug and socket are

compatible and can be

used simultaneously.

• Applicable range: 0V–4.5V.

• When switching between 35X and 70X,

push until you hear a “click”; switch to

the left for 35X and to the right for 70X.

• Sockets 1 to 3 are interconnected and

can be used simultaneously.

• Motor mode applicable voltage: 0V–20V.

Seres

connecton

Parallel

connecton

Voltage (Volts)

Input

Socket 1

Input

Socket 2

Low Battery

Indicator

Output Socket

Output Switch

Current (Amps)

Power Switch

of the GEMS

Micro:bit

Connector

Battery Cover

Screw

ON OFF

Plug Socket

Socket 3

Socket 1

Socket 2

35X / 70X Mode Switch

Cross

Axle

Hole for strap Mode Switch (Motor/

Generator)

35X 70X

Before each experiment, determine whether you will

be using motor mode or generator mode. Motor mode

is represented by and generator mode is

represented by .

Bekijk gratis de handleiding van Thames & Kosmos Renewable Energy Lab, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.