Thames & Kosmos Physics Solar Workshop handleiding

Niet gecategoriseerd

Thames & Kosmos

68 pagina's

PDF beschikbaar

Handleiding

1 2

short end

1. Start with a long frame (2), three anchor pins (26), one medium (17)

and one long axle shaft (16), one small gear wheel, and one medium

sprocket wheel (10).

3. Now you will combine the two frames together. Connect the axle

shafts with one medium sprocket wheel (10) and one small sprocket

wheel (9) to form two long axles.

5. For the other end’s attachment section, use four anchor pins (26) to

mount two short rods (4) to another short frame (3).

7. The two base plates (1) form the cargo bed. They are connected with

the two attachment plates (27) into a single continuous surface and

then placed on the framework.

2. Equip a second long frame (2) with the same components, except

use a small gear wheel (8) instead of the medium sprocket wheel.

4. Now connect the two side sections with a short frame (3) and align

the gear wheels on the axles.

6. Now attach the second frame to the side sections. The two small

crossways-mounted frames serve to stabilize the structure.

8. Insert three anchor pins (26) into each of two long frames (2). Attach

the engine (24) with engine shaft and a small sprocket wheel (9) to the

rear frame.

Bekijk gratis de handleiding van Thames & Kosmos Physics Solar Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.