Thames & Kosmos Physics Solar Workshop handleiding
Handleiding
Je bekijkt pagina 31 van 68
11
12
13
14
15 16
11. The floor of the cage is made of two short frames (3) connected by a
short rod (4). You will need to use two anchor pins (26).
13. Now insert the two short frames into the floor. A short rod (4)
connects the frames at the top for stability.
15. Place the cage in the elevator shaft and add the short frame from
the last step. Two medium gear wheels (7) go on the shaft plugs. A
piece of cardboard (8 x 11 cm) will strengthen the floor.
12. Each of the side walls consists of one short frame. Take two short
frames (3) and insert six anchor pins (26) as shown in the picture.
14. One more short frame (3) prevents the cargo from falling out of
the cage. Insert two shaft plugs (25) and one anchor pin (26) into the
frame.
16. Finally, suspend the cage from the crane hook. The hook itself
should hang from the center hole of the small rod lying across the top
of the framework.
29
Bekijk gratis de handleiding van Thames & Kosmos Physics Solar Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Physics Solar Workshop |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 81862 MB |
