Thames & Kosmos Physics Solar Workshop handleiding
Handleiding
Je bekijkt pagina 30 van 68
5
6
7
8
9 10
5. Now you will construct the lift system. Insert four anchor pins into
two long rods (5) and insert a long axle shaft (16) through the center of
one rod.
6. Push a sprocket wheel (11) onto the axle shaft and guide the shaft
through the second long rod. Now attach two short rods (4) with two
more anchor pins (26).
8. Insert the engine shaft (19) into the solar engine (24). Mount a small
sprocket wheel (9) onto the shaft. Mount the engine so that the small
sprocket wheel moves the large sprocket wheel.
10. Next, mount the lift system onto the top of the support framework.
The short rod on which the engine is mounted should sit flush with the
front of the framework.
7. Next, attach another short rod (4) to the anchor pins on the short
rods you just mounted. Also, push a small gear wheel (8) onto the
shaft.
9. Now attach the battery holder (22) to the short rod on the left,
mount the solar module (23), and attach both electricity cables (20/21).
Then attach the crane spool (28).
28
Bekijk gratis de handleiding van Thames & Kosmos Physics Solar Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Physics Solar Workshop |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 81862 MB |
