Thames & Kosmos Ooze Labs: Chemistry Station handleiding
Handleiding
Je bekijkt pagina 9 van 20
Lab Station Assembly
Before starting any experiments, follow these
instructions to put your lab station together.
YOU WILL NEED
17 pieces of the lab station
HERE’S HOW
1. Insert a test tube rack into two vertical
rods as shown. Repeat with the other test
tube rack and the other two vertical rods.
2. Insert the four vertical rods into the station
base as shown.
3. Insert all nine of the clips into the vertical
rods. They are all moveable and can be
repositioned for experiments as needed.
4. Insert the tool holder onto the tool holder
compartment on the left side of the station.
x2
x9
1
2 3
4
Small test tubes
Wide test tubes
Small test
tubes
Experiment
cards
Small test
tubes
Syringe
Erlenmeyer
flask
Wide test
tubes
Tool holder
Parts well
Petri dish
Here’s what each part is designed to hold:
› › › INTRODUCTION
Experiments 1 through 9 are on the experiment cards. You
should start with Experiment 1 and conduct the experiments in
numerical order. Experiments 10 through 20 are in this manual.
START WITH THE CARDS!
Ooze Labs Chemistry Station
7
Bekijk gratis de handleiding van Thames & Kosmos Ooze Labs: Chemistry Station, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Ooze Labs: Chemistry Station |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6140 MB |
