Thames & Kosmos Monster Sewing Workshop handleiding
Handleiding
Je bekijkt pagina 10 van 20

8
4
The whipstitch: This is the stitch you use to
close the gap in the fabric after you have
filled your monster with cotton. Start by
folding the seam allowance inward at the
opening.
Then, insert the needle through the fabric at
the top from the inside to the outside. Next,
insert the needle a little farther to the left on
the back and bring it out the front, through
both pieces of fabric. The thread “bridges” the
opening in the fabric at a slant. Continue
until the opening is completely sewn shut.
5
The zigzag stitch: You can use the zigzag
stitch to sew your monster a ravenous mouth,
for example. Start by inserting the needle
through the back of the fabric and bring it out
the front.
Beneath the spot where the thread emerges
out of the fabric, insert the needle from right
to left, as shown in picture (a). Now insert the
needle again at the spot where the thread
first came out of the fabric (b). You will get a
little V. On the back side, continue a little to
the left, then backwards at an angle, and so
on (c).
6
Burying the thread: Your seam will only hold
properly if you bury it securely at the end.
You do this by making several small stitches.
Each time, you will make a little loop of
thread, guide the needle through the loop,
and pull the thread through. Finally, cut off
the thread. You have now secured the seam.
4
5
6
a)
b)
c)
Bekijk gratis de handleiding van Thames & Kosmos Monster Sewing Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Monster Sewing Workshop |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 39958 MB |







