Thames & Kosmos Mechanical Engineering: Robotic Arms handleiding
Handleiding
Je bekijkt pagina 6 van 40
What Is a Robotic Arm?
› › › USING THE ROBOTIC ARMS
General instructions for using the pneumatic system
After following the step-by-step instructions to build one of the models (starting on page 6), follow these
general instructions to operate the pneumatic system in the model. Each model works a little differently.
There are specific instructions for using each model at the end of each set of assembly instructions. See
page 25 for an explanation of how the pneumatic system works.
Put the switch lever in the center
position.
1
Pump about 30 times to fill the air
tank.
2
Depending on the model, you will
need to push or pull the switch
lever to operate the device in one
direction.
3
6
Again, depending on the model, you
will need to push or pull the switch
lever to operate the device in the
other direction.
5
4
For example, here the gripper closes
when you pull the lever.
In this example, the gripper opens
when you push the lever.
4
Bekijk gratis de handleiding van Thames & Kosmos Mechanical Engineering: Robotic Arms, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Mechanical Engineering: Robotic Arms |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 43838 MB |
