Thames & Kosmos Gravity Bugs - Free-Climbing MicroBot handleiding

Niet gecategoriseerd

Thames & Kosmos

20 pagina's

PDF beschikbaar

Handleiding

Sandpaper

STEPS

17 – 19

Gently move the

gears with your

finger. The gears

will mesh with

each other If the

gray gear turns.

Place the white gears (P6) on the long

metal rods in the order shown.

Make sure the outside teeth

of each P6 gear mesh with

the inside teeth of the gear

below it.

9 9

Many gears look alike. Part 9

has a circular column.

12 12

Place two part 9 gears as shown. Use

sandpaper to thoroughly remove any burrs

from the gears.

Place two part 12 gears, with the teeth facing

down, on the blue pegs as shown.

Check the gears:

Gently move the gears with your

finger. All four white gears and the

gray gear (P5) should turn together.

Check the gears:

The teeth of part 12 should mesh with

the teeth of parts 9 and 10, but the gears

will not turn, because they are locked in

place by the alignment tool (part 11).

Bekijk gratis de handleiding van Thames & Kosmos Gravity Bugs - Free-Climbing MicroBot, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.