Thames & Kosmos Crystal Nightlight handleiding
Handleiding
Je bekijkt pagina 16 van 20
Assemble your
crystal nightlight and
display box
You will need:
Die-cut figure, your base with LED, your
fully dried crystal, all-purpose glue
Here’s how:
1
Lower your crystal over the LED and
insert the little feet of the plastic
cone into the two square holes.
2
Remove the display box parts from
the die-cut sheet and fold them
along the marked lines. Glue the
display box together as shown in
the pictures.
3
Lower the display box over
the crystal and marvel at the
fascinating color show.
3
2
3
1
GEEK
OUT!
WHAT’S HAPPENING?
The color-changing LED actually consists of three different
lights — a red one, a green one, and a blue one. By mixing
equal parts of red, green, and blue light, you get what our
eye sees as white light.
If you reduce the portion of one color or omit it
entirely, you can produce any color you like. This
effect is known as additive color mixing, and it is a
little different from the mixing of water color paints,
which would give you black if you mixed all the colors
(subtractive color mixing).
The built-in electronics ensure that the LED
lights sometimes shine individually and sometimes
together — which produces all the different colors.
14
Bekijk gratis de handleiding van Thames & Kosmos Crystal Nightlight, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Crystal Nightlight |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7230 MB |
