Thames & Kosmos Crystal Nightlight handleiding
Handleiding
Je bekijkt pagina 15 van 20
4
On the inside, carefully (!) bend
the two terminals (“legs”) of the
LED a little to the left and right,
and clamp them more or less in
the center of the two contact
springs. Then, place the springs
over the two attachments with
the eyelets in such a way that
the LED terminals sit in the
attachment slots.
5
Insert the batteries into the
battery compartment in the
correct polarity direction.
6
Close the lid and secure it in
place with the two silver screws.
Switch on the LED by setting the
switch to “ON.”
GEEK
OUT!
WHAT’S
HAPPENING?
You have installed an LED into the
circuit, and the battery supplies it
with energy. The electricity flows
from the battery compartment
through the switch and then
through the LED and back to the
battery compartment again.
Where are LEDs used?
The first LEDs, which could only shine
very weakly, were used in things like
digital watches. Today’s LEDs can
produce a lot more light, and they have
many applications — in illuminated
displays, backlighting for flat screens,
traffic lights, and in all sorts of other
kinds of lights, such as car headlights,
flashlights, and even street lighting.
4
5
6
From above
13
Bekijk gratis de handleiding van Thames & Kosmos Crystal Nightlight, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Crystal Nightlight |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7230 MB |
