TFA 38.2023 handleiding
Handleiding
Je bekijkt pagina 7 van 20
TRIPLE TIME XL – Digital Triple Timer
1312
6.Stopwatch
•
Press ST/SP/MEMORY button in clock-mode.
•
In the middle display the 1/100 seconds will be counted.
•
Hours, minutes and seconds appear in the lower display.
•
Use ST/SP/MEMORY button to stop and restart the counting.
•
Press CLEAR button to reset the display.
7.Count Down Timer
•
In timer-mode TIMER 1 appears in the upper, TIMER 2 in the middle
and TIMER 3 in the lower display.
•
Press and hold T1 or T2 or T3 to select a timer.
•
A short beep will sound and the selected timer is flashing.
•
Press HR button to set the hours, press MIN/12/24 HR button to set
the minutes and press SEC button to set the seconds.
•
Press the respective T1 or T2 or T3 button to confirm the desired
setting.
•
Press T1 or T2 or T3 button to start the count-down of the respec-
tive timer.
•
Press T1 or T2 or T3 button again to stopp/restart the counting of
the respective timer.
•
For simultaneous operation of all three timers set the desired time
for TIMER 1, TIMER 2, TIMER 3.
•
Press ST/SP/MEMORY button to start/stop and restart the count-
down of TIMER 1, TIMER 2, TIMER 3 at the same time.
•
When the timer counts down to 00:00:00, a beeping alarm
(1 min.) will sound, the display flashes and TIME'S UP appears.
•
Now the timer will start to count up the elapsed time until it is
stopped by pressing ST/SP/MEMORY button or the respective
TIMER button (T1, T2, T3).
TRIPLE TIME XL – Digital Triple Timer
2.3 Back (Fig. 3)
P:
Stand (fold out)
Q:
Wall mount hole
R:
RESET button
S:
Magnet
T:
Battery compartment
3.Getting started
•
Open the battery compartment and remove the insulation strip.
•
A short beep will sound and all LCD segments will light up for
about 2 seconds.
•
The unit is now ready to use.
4.Operation
•
Press CLOCK/TIMER button to toggle between clock-mode or timer-
mode.
•
Press and hold HR button or MIN/12/24 HR button or SEC button,
you will enter fast mode.
•
All successful settings will be confirmed by an acoustical signal.
5.Time
•
Press and hold CLOCK/TIMER button in clock-mode for 3 seconds.
•
In the upper display the hours, minutes and seconds indication
flashes.
•
Press HR button to set the hours, press MIN/12/24 HR button to set
the minutes and press SEC button to set the seconds.
•
Confirm with CLOCK/TIMER button.
•
Press MIN/12/24 HR button to choose 12 HR (AM or PM appears on
the display) or 24 HR system.
TFA_No. 38.2023_Anleitung 04.03.2011 11:10 Uhr Seite 7
Bekijk gratis de handleiding van TFA 38.2023, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TFA |
| Model | 38.2023 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2283 MB |
