Tenda W12 handleiding
Handleiding
Je bekijkt pagina 9 van 109
2
---End
If the above page does not appear, try the following solutions:
− If an Tenda AP (including Tenda router with AC functionality) has already been deployed in the
network, AP may have been managed by the AC and its IP address has changed. Please log in to the
Web UI of the AC and check the new IP address of the AP, and log in again using the new IP address.
− If more than one AP are deployed in the network, IP address conflicts may occur, causing web UI
login errors. Verify that the IP address of the AP is not occupied before being integrated into the
network.
− Reset the AP and log in using the default IP address. How to reset: When the SYS LED indicator blinks
green, remove the front cover, hold down the reset button for about 8 seconds, and release when
the green LED indicator turns solid on. When the SYS LED indicator blinks again, the AP is reset.
Log in to the web UI of the AP. You can configure the AP now.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
