Tenda W12 handleiding
Handleiding
Je bekijkt pagina 43 van 109
36
6.1.4 Example of Setting up a Wireless Network Encrypted with
WPA or WPA2
Networking requirement
A highly secure wireless network is required and a RADIUS server is available. In this case, WPA or
WPA2 mode is recommended. See the following figure.
Configuration procedure
Configure the AP
Assume that the IP address of the RADIUS server is 192.168.0.200, the RADIUS password is
12345678, and the port number for authentication is 1812.
Assume that the second SSID of the AP is used.
Step 1 Choose Wireless Setting > SSID Settings.
Step 2 Select the second SSID from the SSID drop-down list box.
Step 3 Select the Enable check box.
Step 4 Change the value of the SSID text box to hot_spot.
Step 5 Set Security Mode to WPA2.
Step 6 Set RADIUS Server, RADIUS Port, and RADIUS Password to 192.168.0.200, 1812, and
12345678 respectively.
Step 7 Set Encryption Algorithm to AES.
Internet
Router
PoE switch
SSID: hot_spot
RADIUS server
IP: 192.168.0.200
WAN
LAN
AP
IP 192.168.0.254
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
