Tenda W12 handleiding
Handleiding
Je bekijkt pagina 34 van 109
27
Parameter
Description
Broadcast SSID
When this parameter is set to Disable, the AP does not broadcast the SSID and nearby
wireless clients cannot detect the SSID. In this case, you need to enter the SSID
manually on your wireless client if you want to connect to the wireless network
corresponding to the SSID. It enhances the security of the wireless network.
Isolate Client
It isolates the wireless clients connected to the same wireless network corresponding to
an SSID, so that the wireless clients can access only the wired network connected to the
AP. Applying this function to hotspot setup at public places such as hotels and airports
helps increase network security.
WMF
The WMF function of the AP converts multicast traffic into unicast traffic and forwards
the traffic to the multicast traffic destination in the wireless network. This helps save
wireless resources, ensure reliable transmission, and reduce delays.
Suppress Broadcast
Probe Response
By default, wireless devices keep sending Probe Request packets that include the SSID
field to scan their nearby wireless networks. After receiving such packets, this device
determines whether the wireless devices are allowed to access its wireless networks
based on the packets and responds using the Probe Response packets (including all
Beacon frame parameters), which consumes a lot of wireless resources.
After this function is enabled, this device does not respond to the requests without an
SSID, saving wireless resources.
Max. Number of
Clients
It specifies the maximum number of clients that can be concurrently connected to the
wireless network corresponding to an SSID.
After this upper limit is reached, the AP rejects new requests from clients for connecting
to the wireless network.
SSID
It enables you to change the selected SSID.
Chinese characters are allowed in an SSID.
Chinese SSID
Encoding
It specifies the encoding format of Chinese characters in an SSID. The default value is
UTF-8.
If multiple SSIDs of the AP are enabled and contain Chinese characters, you are
recommended to set this parameter to UTF-8 for some SSIDs and to GB2312 for others,
so that any wireless clients can identify these SSIDs.
Security Mode
It specifies the security mode of the selected SSID. The options include: None, WEP,
WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK, WPA, and WPA2.Clicking the hyperlink
navigates you to the elaborated description of the corresponding security mode.
Security Mode
A wireless network uses radio, which is open to the public, as its data transmission medium. If the
wireless network is not protected by necessary measures, any client can connect to the network to
use the resources of the network or access unprotected data over the network. To ensure
communication security, transmission links of wireless networks must be encrypted for protection.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
