Tenda SG04E handleiding
Handleiding
Je bekijkt pagina 3 van 14
- 2 -
1. Install the ONU
Preparations
NOTE
− Desktop mounting: ESD bracelet or gloves
− Wall mounting: ESD bracelet or gloves, ladder, screwdriver, marker,
hammer drill, rubber hammer, spirit level, 2 screws (self-prepared, thread
diameter: 3 mm, length: 14 mm, head diameter: 5.2 mm), 2 plastic
anchors (self-prepared, height: 6.6 mm, inner diameter: 2.4 mm, length:
26.4 mm)
Desktop Mounting
Horizontally place the ONU right-side up on a big enough, clean, stable
and flat desktop.
Wall Mounting
➊ Mark your wall for the wall-mounting slots on the bottom of the ONU
(distance between two holes: 80 mm) and drill two holes (diameter: 6
mm) horizontally.
➋ Hammer plastic anchors into the holes.
➌ Insert screws into the plastic anchors, leaving a gap (at least 2.5 mm)
between the screw heads and plastic anchors.
➍ Place the ONU on the screws and slide it down until it locks into place.
− The ONU can only be installed on non-flammable walls, such as a concrete wall.
− Do NOT install the ONU with air vents facing downward. Otherwise, there will be potential safety
hazards.
Bekijk gratis de handleiding van Tenda SG04E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | SG04E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 862 MB |
