Tenda i36 handleiding
Handleiding
Je bekijkt pagina 21 van 111
15
Document Version: V1.3
Parameter description
Parameter
Description
System Status
Device Name
Specifies the name of the AP.
You can change the AP name on the LAN setup module.
Cloud Management
Specifies the connection status between the AP and the Tenda
CloudFi cloud platform.
Uptime
Specifies the time that has elapsed since the AP was started.
System Time
Specifies the system time of the AP.
Firmware Version
Specifies the firmware version of the AP.
Hardware Version
Specifies the hardware version of the AP.
Number of Wireless
Clients
Specifies the number of wireless clients connected to the AP.
Working mode
Specifies the working mode of the AP.
Bridging state
Specifies the bridging status of the AP.
SN
Specifies the serial number of the AP.
LAN Port Status
MAC Address
Specifies the physical address of the LAN port of the AP.
IP Address
Specifies the LAN IP address of the AP.
The web UI of the AP is accessible by visiting this IP address. You can
change the IP address on the LAN setup module.
Subnet Mask
Specifies the subnet mask of the AP.
Primary DNS
Specifies the IP address of the primary DNS server of the AP.
Secondary DNS
Specifies the IP address of the secondary DNS server of the AP.
LAN0/PoE
Negotiation Rate
Specify the negotiation rate of the Ethernet port.
LAN1 Negotiation
Rate
Management IP
address
Specifies the management IP address of the AP. You can log in to the
web UI of the AP through this IP address.
Bekijk gratis de handleiding van Tenda i36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | i36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18170 MB |
