Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 50 van 159
43
Document version: V1.0
− SLAAC: Specifies the DHCPv6 stateless configuration. The IPv6 prefix address and gateway
address of the client are obtained through RA, the interface address is generated based on
the standard, and the DNS server address is obtained from the DHCPv6 server.
− SLAAC+RDNSS: Specifies the stateless address automatic configuration. The IPv6 prefix
address and gateway address of the client are obtained through RA, the interface address
is generated based on the standard, and the DNS server address is obtained from the
RDNSS option in the RA packet.
− DHCPv6: Specifies the stateful configuration of Dynamic Host Configuration Protocol for
IPv6 (DHCPv6). The client obtains the complete IPv6 address information, including the
DNS server address, from the DHCPv6 server. The gateway address is obtained through RA.
8. (Optional) when the Internet Connection Type of IPv6 WAN is Static IPv6 Address, enter the
IPv6 LAN Prefix.
9. Click Save.
---End
Your settings are saved. To test whether IPv6 network is accessible, see Test whether IPv6 network
is accessible.
3.6.2 Via Tenda WiFi App
To set up an IPv6 internet connection:
1. Run the Tenda WiFi App, then tap your router on Homepage.
2. Tap More Functions next to Common Functions, then tap IPv6 (below Advanced Functions).
3. Turn on IPv6.
4. Configure IPv6 WAN Settings and IPv6 LAN Settings. For more information, see To set up an
IPv6 internet connection via web browser.
5. Tap Save.
---End
Your settings are saved. To test whether IPv6 network is accessible, see Test whether IPv6 network
is accessible.
3.7 Change WAN port negotiation speed
When the Ethernet cable is intact and connected to the WAN port properly, but a prompt indicating
that no Ethernet cable is connected to the WAN port is still shown on the Internet Settings page,
you can try to change the Speed to 10 Mbps full duplex or 10 Mbps half duplex to solve the
problem. Otherwise, keep the default settings.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
