Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 34 van 159
27
Document version: V1.0
Static IP:
1) Set Internet Connection Type to Static IP.
2) Enter IP Address, Subnet Mask, Gateway and Primary DNS, and Secondary DNS provided
by your ISP.
If your ISP provides only one DNS server, you can leave Secondary DNS blank.
Russia PPPoE:
1) Set Internet Connection Type to Russia PPPoE.
2) Enter the PPPoE Username and PPPoE Password provided by your ISP.
3) Select an Address Type (turn on or turn off DHCP) for obtaining IP address information to
access the “local” resources where the ISP is located.
4) If the Address Type is Dynamic IP Address (DHCP), select an IPv4 Domain Name Server
(DNS) Address radio button:
− Auto: Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this
address.
− Manual: If you know that your ISP requires specific servers, select this option. Enter the IP
address of your ISP’s primary DNS server. If a secondary DNS server address is available,
enter it also.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
