Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 113 van 159
106
Document version: V1.0
Via Tenda WiFi App
To check for new firmware and update your primary and secondary nodes:
1. Run the Tenda WiFi App, then tap your router on Homepage.
2. Tap More Functions next to Common Functions, then tap Device Upgrade (below Common
Functions).
3. If new firmware is available, do one of the following:
− To upgrade all nodes, tap One-click Upgrade.
− To upgrade a node, tap the target node, then tap Upgrade.
---End
Wait until the upgrade completes. Then, go to the Firmware Upgrade (or Device Upgrade) page
again and check whether the upgrade is successful based on Current Version.
6.14.2 Manually upgrade firmware
To prevent the mesh device from being damaged:
Ensure that the firmware is applicable to the mesh device.
When you are upgrading the firmware, do not power off the mesh device.
1. Go to www.tendacn.com. Download applicable firmware of the mesh device to your local
computer and unzip it.
2. Launch a web browser from a computer that is connected to your NOVA network.
3. Enter tendawifi.com.
A login window displays.
4. Enter the login password.
The password is case-sensitive.
5. Go to More > System Settings > Firmware Upgrade.
6. Click Local Upgrade in the line of the node to be upgraded.
7. Click Select File.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
