Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 10 van 159
3
Document version: V1.0
2. Within 2 minutes, enable WPS or MESH on your device to connect the router.
---End
RESET
Reset button.
When the device completes startup, hold down this button using a needle-like item (such as a pin)
for about 8 seconds, and then release it when the indicator blinks red fast. If the indicator blinks
green slowly, the device is reset and restart successfully.
1/2/3
For primary node:
By default, the mesh device works in router mode. In this mode, port 1 is the WAN port, and port 2
and port 3 are LAN ports.
When you enable WAN/LAN auto-negotiation function, ports 1, 2, and 3 are all WAN/LAN auto-
adaptive ports.
To enable WAN/LAN auto-negotiation function, see Manage WAN/LAN auto-negotiation.
When the IPTV function is enabled, you need to configure the IPTV port in IPTV.
For secondary node:
Port 1, 2, and 3 are LAN ports.
POWER
Power jack.
1.3 Label
The router label shows the router’s MAC address and serial number. There's also a QR code on the
label that you can scan with your device's built-in code scanner to connect to your router's default
Wi-Fi to set up the router. The label is located on the bottom of the router. Following is an example
of what the router label might look like:
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
