Telefunken M09326 handleiding
Handleiding
Je bekijkt pagina 27 van 32
Troubleshooting
Before requesting a repair, check the machine as follows.
FAILURES
CAUSES
SOLUTIONS
The machine does not start
No power supply:
• Not connected
• Damaged plug or
socket
• Broken fuse
• Connect the plug
• - Replace power cord or
plug
• - Replace fuse from service
provider (Specifications:
3.15A/250VAC)
(Specifications:
3.15A/250VAC)
The machine stops
automatically
Timed switch-off or reaching
set temperature
Restart or wait for automatic
switching
No cold air in COOLING
mode
• The ambient
temperature is
below the set
temperature
• Machine enters frost
protection
• This is a normal
phenomenon: the machine
switches on automatically
when the ambient
temperature is higher than
the set temperature
• The machine switches on
automatically when frost
protection is over
The LED displays the fault
code 'E0'
Room temperature sensor is
faulty or damaged
Replace room temperature sensor
The LED displays the fault
code 'E4'
Full water warning Drain the water
Bekijk gratis de handleiding van Telefunken M09326, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Telefunken |
| Model | M09326 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2399 MB |