Tektronix TBS1052C handleiding
Handleiding
Je bekijkt pagina 46 van 146
2. IMPOR
TANT: Remove all input signals (probes and cables) from channel inputs and the Aux In connector on the front of the
oscilloscope.
3. Push Utility.
4. Push the Calibration & Diagnostic side-menu button.
5. T
urn the Multipurpose knob to select Signal Path, then click the Multipurpose knob to start the SPC process.
The oscilloscope shows a Signal Path Compensation information message.
6. Push the Compensate Signal Paths side-menu button to start the process.
The screen shows rotating dots while the SPC is run. The oscilloscope displays a message when the SPC is complete. SPC can take
several minutes to run, so wait until the oscilloscope shows a message that SPC is completed.
7. Push Menu Off to remove the message and menus.
8. Reconnect probes to the oscilloscope.
The Scope Intro function
The Scope Intro function provides a brief history of oscilloscopes, some basic oscilloscope concepts, and an overview of the oscilloscope
features and controls.
You can view any topic in any order.
1. Push the Help front-panel button.
Getting acquainted with the oscilloscope
TBS1000C Series Oscilloscopes User Manual 48
Bekijk gratis de handleiding van Tektronix TBS1052C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tektronix |
| Model | TBS1052C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 35612 MB |