Handleiding
Je bekijkt pagina 19 van 25
GB
19
Elements of a burner
Whenever you reassemble a burner,
check that all the components are pro-
perly in place, as a part that is wrongly
positioned can lead to overheating and
damage the glass.
Igniting the burners
* Make sure that the knobs are in their
correct position.
* Turn on the gas at the mains or turn the
gas cylinder’s tap.
* Press down the burner control.
* Keeping the burner control pressed
down, turn it all the way till the gas igni-
tes. Keep it pressed down for between 2
and 5 seconds so that the safety ther-
mocouple can take effect.
* Set the control to the position required.
With hob CGC 4G AI AL y CG.1 4G AI
AL, proceed as follows: (See fig. 10)
* Make sure that the knobs are in their
correct position.
* Turn on the gas at the mains or turn the
gas cylinder’s tap.
* Press the control knob and at the same
time turn it anti-clockwise to the On posi-
tion (the spark symbol). When the gas
ignites, keep the knob at this position for
between 2 and 5 seconds to enable the
safety thermocouple to work.
* Set the control to the position required.
The ignition (ceramic and electrode)
should be cleaned regularly and care-
fully in order to avoid ignition problems.
Check, too, that the grooves in the bur-
ners have not become obstructed.
Use and Maintenance
fig. 8
Grid accessory
Grid
Diffusing cover
Diffusing crown
Injector
Injector holder
fig. 9
‘Burner in operation’ indicator
Knob position when not in use
Maximum gas position
Minimum gas position
Off position
Star (On position)
Bekijk gratis de handleiding van Teka CG.1 60 4G AI AL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | CG.1 60 4G AI AL |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4165 MB |
