Tefal Ultimate FV9510 handleiding
Handleiding
Je bekijkt pagina 10 van 87
7
Description
1 Spray
2 Thermostat indicator
3 Antiscale valve grip
4 Dry/Steam control
5 Spray Button
6 Shot of Steam Button
7 Auto-Stop safety warning light (depending on model)
8 Gel comfort handle (depending on model)
9 Electric power cord
10 Extra-large heel with non-slip pad
11 Opening button to water tank
12 Integral anti-scale system
13 Thermostat indicator light
14 Autosteam Control Thermostat
15
Gliss/Glide Protect ™ autoclean soleplate (according to
model)
Ultraglide
®
Diffusion soleplate
(according to
model)
Autoclean Catalys soleplate
(according to
model)
16 Water tank filler hole
Before using for the first time
Warning! Before using your iron with the steam function for the first time, we
recommend that you operate it in a horizontal position for a few moments, away from
your linen, i.e. press the Shot of Steam button a few times.
During the first few uses, a harmless odour and a small amount of smoke may be given
off.
This has no effect on the use of the iron and will disappear quickly.
What water to use?
Your appliance has been designed to function with untreated tap water. However, it is necessary to operate the Self-Clean
function regularly in order to eliminate hard water deposits from the steam chamber.
If your water is very hard (check with your local water authority), it is possible to mix tap water with store-bought distilled or
demineralised water in the following proportions : - 50% tap water, - 50% distilled or demineralised water.
Types of water not to use?
Heat concentrates the elements contained in water during evaporation.The types of water listed below contain organic waste
or mineral elements that can cause spitting, brown staining, or premature wear of the appliance : water from clothes dryers,
scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain
water should not be used in your Tefal iron. Also do not to use boiled, filtered or bottled water.
Use
Steam ironing
1. Filling the water tank
- Unplug your iron before filling it.
- Set the steam control to DRY
- fig. 1.1
.
- Take the iron in one hand and tilt it slightly, so that you can see the water tank filling hole
- fig. 3.
- To open the water tank, press the button
- fig. 2.
- Fill the water tank
- fig. 3
up to the mark “MAX”. The mark MAX corresponds to a capacity of 350 ml.
- Close the water tank cover until you hear a click
- fig. 4.
- You can now plug in your iron.
2. Choose your ironing programme
- Your iron has the Autosteam Control function, which recommends 8 different ironing programmes:
• Set the Autosteam Control Thermostat to match the type of textile you wish to
iron. Your iron accurately determines the exact temperature and steam flow
that are suitable, in order to guarantee the best results.
• To select the appropriate ironing programme, activate the thermostat located
under the handle
- fig. 5.
- Rotation left : selects the programs requiring low temperature and steam
levels.
- Rotation right : selects the programs requiring high temperature and steam
levels.
- The program selected appears automatically on the indicator panel at the front
of the iron
- fig. 6.
- Set the steam control to STEAM
- fig. 1.2.
- When your iron reaches the required temperature, the thermostat indicator
goes out
- fig. 7.
You can start ironing.
3. Spray Function
- While ironing, press a few times in succession on the Spray button to dampen
the fabric
- fig. 8
and iron out awkward creases.
Warning !
Remove any labels
from the soleplate
before heating up the
iron (depending on
model).
Recommendations: Fabrics and ironing
temperatures:
• Your iron heats up quickly: so begin by
ironing fabrics that are ironed at low
temperatures first, then go on to those
requiring a higher temperature,
• if you change to a program requiring
lower temperatures, wait for the
thermostat light to come on again
before continuing to iron.
• when ironing fabrics with mixed fibres,
set the ironing temperature for the
most delicate fibre. For delicate fabrics
we recommend testing the fabric first
on an inconspicious place eg (inside
them).
• For best results we recommend you use
a vented ironing board to allow the
powerful steam to penetrate through
the fabric more efficiently.
DE
EN
FR
NL
IT
ES
PT
DA
NO
SV
FI
EL
CS
HU
SK
HR
SL
RO
SR
BG
PL
TR
RU
UK
ET
LV
LT
1800135516 FV95XX E2_110x154 26/01/15 14:45 Page7
Bekijk gratis de handleiding van Tefal Ultimate FV9510, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tefal |
| Model | Ultimate FV9510 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17320 MB |
