Teesa TSA8067 handleiding
Handleiding
Je bekijkt pagina 11 van 29
20 21Owner’s manualOwner’s manual
EN EN
FIGURE I
1
Mist vent
10
Motor unit
2
Mist ring
11
Tilt adjustment knob
3
Front guard
12
Mist hose
4
Blade lock nut
13
Control panel
5
Blade
14
Water tank cover
6
Ring
15
Water tank
7
Guard lock nut
16
Mist generator
8
Rear guard
17
Base
9
Motor shaft
18
Low water level indicator
PRODUCT DESCRIPTION
FIGURE STEP
IV
Remove the screw and pass the wire through the pipe. Then install the pipe on
the mist generator and fasten the screw.
V
Attach the wheels to the base by pressing them into the designated slots at the
bottom of the base until they are locked in place.
VI
1. Place the water tank on the mist generator, ensuring it is appropriately seated
in the recess.
2. Fit the cover to the top of the water tank.
VII
1. Loosen the xing screw of the fan body and then connect the fan body
terminal with the terminal wire in the iron pipe. Install the fan body on the
iron pipe and tighten the screw.
2. Insert the lower mist hose of the fan body into the water tank cover (ensure
the hose is free of kinks).
VIII
Install the rear guard, guard lock nut, blade and blade lock nut to the motor shaft
and x in place.
IX, X
Install the front guard and ring, and secure using the screw on the ring.
XI
Connect the upper mist hose to the mist vent that is located at the front of the
front guard (ensure the hose is free of kinks).
XII, XIII
1. Take o the cover of the water tank.
2. Fill the tank with cold and clean water, making sure not to overll it.
3. Put the cover on the tank and place the tank back on the mist generator.
• Carefully unpack the mist fan and remove all the packing materials.
• Please check whether there are any missing parts. The mist fan can be assembled only when
the parts are complete.
• Use a soft cloth to remove any dust on the surface that may happen during packing and transport.
• Place the mist fan on a at and stable surface.
• Connect the plug of the power cord to the power outlet.
• Press the button on the control panel / remote control to turn on the device.
GETTING STARTED
ASSEMBLY
Bekijk gratis de handleiding van Teesa TSA8067, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teesa |
| Model | TSA8067 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 5054 MB |
