Teesa TSA8048 handleiding
Handleiding
Je bekijkt pagina 12 van 43
22
Owner’s manual
23
Owner’s manual
ENEN
PREPARING COOKING CONTAINER
STAGE 1- SETTING TEMPERATURE AND TIME/ RED LED RING
STAGE 2- HEATING/ BLUE LED RING
9. Press the power button to conrm settings and start heating water. Color of the
LED ring changes from red to blue.
• During operation, lower display will show current water temperature. At the
beginning it shows room temperature. As the heating process progresses, the
temperature will gradually increase until it reaches set value.
• The set temperature willappear on the higher display for3 seconds, then it will
disappear to show set time for 3 seconds. The display will toggle back and
forth between set temperature and set timer.
10. The timer will start countdown when set temperature is reached.
5. Press and hold the power button for about 3 seconds. You will hear 3 beeps.
LED display and LED ring light up. Red color of the LED ring indicates initial
stage when you can set temperature and time.
6. Press and hold the settings button to change the temperature unit.
7. Press the settings button. Digits on the upper display blink. Press the +/-
buttons to set desired temperature.
8. Press the settings button again. When digits start to blink, use +/- buttons
again to set desired hour. Press the settings button once again to set minute.
• Make sure cooking container is 5 to 20 liters capacity. It must be large enough to
hold food bags with plenty of room for water to circulate evenly around each bag.
• Use the appliance with cooking containers being resistant to high temperatures.
• Place the cooking container on a at, stable and heat resistant surface with easy
access to wall outlet.
1. Fill cooking container with water.
• Do not use any other liquid nor deionized water.
• Make sure water is between MIN and MAX marking. Do not ll in less or more.
• Keep observing water level throughout the cooking process. If water
level drops below MIN marking, please add more water.
2. Make sure the metal guard is properly installed on the appliance.
3. Fix the clamp in the rim of the cooking container. Make sure the metal guard is
immersed in water.
4. When all that is completed, connect the power cord to the wall outlet. You will
hear a beep and the power button will light up red.
• Do not leave the appliance unattended when it’s working.
• Only use the appliance with water.
• Don’t use deionized water to cook.
• The water level should be below the MAX marking on the metal guard. Never allow
water level to drop below MIN marking.
• Do not place food directly into cooking container. Always seal food in a bag before
submerging it into water of the cooking container.
• E3 error code will appear on the display and sound alarm will go o when water
level is too low (below MIN marking on the metal guard). Add water immediately.
• If the device falls into water, do not touch it but unplug it immediately.
• Burn danger: cooking container, metal guard and plastic bag can heat. Please be
sure to use oven gloves or tongs to take any foods from cooking container.
• After unplugging the appliance from the wall outlet, metalguardand heating element
are still hot. Donottouch.Make sure toplace theapplianceon a heat-resistantsurface.
• The clamp should be xed in the rim and kept vertical to avoid overow and
overturning. Always make sure the clamp is securely xed to the cooking container.
• Do not move the appliance or the cooking container during use.
• Unplug the appliance before removing it from the cooking container.
Bekijk gratis de handleiding van Teesa TSA8048, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teesa |
| Model | TSA8048 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3969 MB |
