Handleiding
Je bekijkt pagina 25 van 88
Owner’s manual 25
EN
CLEANING AND MAINTENANCE
• Clean all the parts that will come in the contact with food prior to rst use of the device!
• Disconnect from the power supply socket before disassembling and cleaning.
• The motor unit, the power cable and the mains plug must not be immersed in water or
any other liquid. Wipe the motor unit with soft, slightly damp cloth only.
• Do not use any sharp or abrasive cleaning agents.
• NOTE: clean the device as soon as possible after each use. Avoid the residues to dry on the
surfaces of the device. Rinse the jar, lid, blade assembly and measuring cup as pre-cleaning.
• After processing very salty food or coloring food, it is suggested to rise the blades right away.
• Lid, blade assembly and measuring cup can be washed in warm soapy water. Rinse and
dry thoroughly.
• Jar can also be cleaned with warm soapy water but do so carefully. It has a safety switch
located in the handle, so pay special attention not to soak nor wet the handle. It is advised
to use a soft, damp cloth to clean the handle.
• Lid and blades may be washed in the dishwasher, on the top shelf. When cleaning in a
dishwasher, be careful not to overdose cleaner or decalcier.
• In case of blades, user can clean them in the dishwasher only if the set temperature is
below 50°C, and drying function is turned o!
• When processing food with color, the plastic parts of the appliance may discolor. Wipe
these parts with vegetable oil, then clean them the usual way.
• For fast cleaning in between preparation of dierent food, blender can be cleaned without
disassembling: pour warm water with few drops of washing liquid into the blender jar.
Close the cover. Fit it on the motor unit and give a few pulses. Remove the blender, rinse
the jug under running water and leave it upside down to dry.
• WARNING: Be careful when handling the blades as they are extremely sharp!
• In case of stubborn stains use a little detergent and wipe over.
• Dry all parts carefully before reassembling the device and storing it.
• Keep the device out of the reach of children, even when storing.
• Store the device in cool, dry place. It is suggested to store the device disassembled. Do not
store the blender with the jar on the motor unit.
TROUBLESHOOTING
If your device fails to function as required, please try this table rst
Problem Possible solution
The motor doesn’t start
or blade doesn’t rotate
• Check if the device is properly connected to the power
supply
• Make sure the jar lid is properly assembled. The motor won’t
start if the lid is not assembled, or is assembled incorrectly.
Bekijk gratis de handleiding van Teesa TSA3546, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teesa |
| Model | TSA3546 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 8400 MB |
