TC Electronic MD4 HD handleiding
Handleiding
Je bekijkt pagina 14 van 22
14 MD4 HD NATIVE User Manual
5.5 Output Page
The Limiter
The limiter cannot prevent destruction of dynamic range from happening at
earlier stages in the production process, but it can get rid of the signals we
know are going to get distorted in consumer CD players, radio processors or data
reduction codecs.
The limiter operates with extended precision in both level and time. Double-
precision calculations are always used.
The Limiter employs adaptive time constants to combat distortion at low
frequencies, while maintaining quick adoption to occasional peaks.
Limiter Gain
Range: -6 dB to +12 dB in 0.1 dB steps
The Limiter Gain is used to control the output loudness (sits between the
compressor and the limiter soft clipper)
Limiter Prole
Range: Dynamic, Soft, Universal, Loud, Voice
Dynamic: Gentle adaptive prole for sensitive dynamic/acoustic content
Soft: Gentle adaptive prole for soft audio content
Universal: Adaptive prole for universal use and general audio content
Loud: Fast adaptive prole for loud/agressive rock/pop/electric content
Voice: Adaptive prole for voice/asymmetric content
Limiter Soft Clip L/R
Range: -6 dB to +6 dB in 1 dB steps; OFF
Soft clipper threshold (sits after the Limiter Gain).
The softclip threshold is relative to 0 dBFS - not to the Ref Level.
Limiter Threshold L/R
Threshold is relative to 0 dBFS - not to the Ref Level.
Range: -12 dB to 0 dB in 0.1 dB increments, OFF
Limiter Link
Range: On=Stereo, O= Left/Right
This links the Limiter in Stereo, or unlinks it in Left and Right
Output Gain
Range: O to 0 dB (<-40 dB: in 3 dB steps, >-40 in 0.5 dB steps)
Output level adjustment for both channels.
Compare Enable
Click to activate the compare function, and activate these controls. Due to the
dierence in level, "in-circuit" and "out-of-circuit" comparisons are often dicult
to make using the BYPASS key. Use the Compare Gain parameter to compensate.
Compare Gain
Range: -20 dB to 0 dB in 0.1 dB steps
Processing with MD4 HD NATIVE will most often also mean raising the level of the
signal.
To make a realistic comparison of processed and unprocessed signal, it is
important to compare at equal levels. Use the Compare level to set a level for the
processed signal.
Bekijk gratis de handleiding van TC Electronic MD4 HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TC Electronic |
| Model | MD4 HD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8045 MB |
