Taurus Roner Clip 360 handleiding
Handleiding
Je bekijkt pagina 8 van 64
• Adjust the working hours. Every press, increases or
decreases 1h.
• Press the setting button to accept
• Adjust the working minutes. Every press, increases or
decreases 1min.
• Finally press the setting button once to x these
parameters.
• Press and hold the Start/Stop button for about 3 seconds
to toggle between Fahrenheit and Celsius temperature
units.
• Press the Start/stop button to begin cooking.
• The timer will start counting down when the set
temperature has been reached.
• When cooking is complete, press the Start/stop button to
stop the cooker.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Stop the appliance using the Start/Stop button.
• Unplug the appliance from the mains.
• Allow it to cool down.
• Clean the appliance.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Remove the turbine protector screw with a screwdriver
• To disassemble the appliance, holding the main body and
turning the skirt counter-clockwise.
• Turn the water pump cap out of the lock position by
turning it clockwise and then pull off.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• It is advisable to clean the appliance regularly.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance’s useful life and could become unsafe
to use.
• The following pieces may be washed in a dishwasher
(using a soft cleaning program) or soapy hot water:
- Stainless Steel Skirt
- Water Pump Cap
• Then dry all parts before its assembly and storage.
Note: Make sure that only the metal parts are exposed to
the water. Do not expose the upper part of the sous vide
stick (motor housing) to water.
Bekijk gratis de handleiding van Taurus Roner Clip 360, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Taurus |
| Model | Roner Clip 360 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5927 MB |
