Taurus Boreal 16CR Go handleiding
Handleiding
Je bekijkt pagina 12 van 84
CHARGING THE BATTERY
Caution: a new battery is not fully charged and must
therefore be charged before the appliance is used for the
rst time.
• Charge the battery at an atmospheric temperature of
between 4 and 40ºC.
• Connect the charger jack using the charge socket on the
appliance. The charge socket is located at the back part
of the appliance.
• Plug the charger into the mains.
• The battery’s charge level will appear on the control
panel.
• Approximately 4h to 6h hours are needed for a complete
charger of the battery. Never attempt to overcharge the
battery.
• When the battery is fully charged disconnect the charger
from the mains supply.
HOW TO CHECK THE BATTERY’S CHARGE LEVEL
• During charging, the battery indicator shows the battery
charge level and turns off when the appliance is fully
charged.
• During use, the appliance will also display the battery
level.
Note: For a long battery life, it is advisable to charge the
battery only when it is fully discharged.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all product’s packaging has been
removed.
• Please read carefully the “Safety advice and warnings”
booklet before rst use
• Prepare the appliance according to the function you wish
to use:
USE
• The appliance can be used directly connected to the
mains or by using his batteries.
• Extend the supply cord completely before plugging it in.
• Attach the appliance to its base making sure that it is
correctly tted into place.
• Guide the appliance to direct the ow of air in the desired
direction.
• Turn the appliance on, by using the on/off button.
• Select the desired speed.
FAN FUNCTION
• Select the desired fan speed by pressing the speed
button.
TIMER FUNCTION
• The operating time of the appliance can be controlled.
• To program the operating time, simply select it using the
timer button.
• After the selected time has elapsed, the appliance will
turn off automatically.
OSCILLATION FUNCTION
• The oscillation function makes it possible to direct the ow
from the appliance so that it automatically alternates over
a range of 75º.
• To activate the swing function, press the swing button.
• To deactivate this function, press the swing button again.
LIGHT FUNCTION
• This applilance has a light on the top of control panel that
allows you to have ambient light when you need it.
USB CHARGING PORT
• This appliance has a 5V 1A USB output so you can
charge your phone or other devices.
HEIGHT ADJUSTMENT
• The height of the appliance can be adjusted by removing
the top tube.
4 IN 1 POSITION (FIG.2)
• This product can be used in 4 position. Stand Fan, Table
fan, Floor Fan and wall fan.
1. STAND FAN: To use as a stand fan, use with all tubes
attached.
2. TABLE FAN: To use as a table fan, remove the top tube.
3. FLOOR FAN: To use it as a oor fan, follow the section
“Assembling the oor fan bracket”.
4. WALL FAN: To use it as a wall fan, follow the section
"Mounting the wall bracket".
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off, using the on/off button.
• Unplug the appliance from the mains if necessary.
• Remove the battery from the appliance if you are not
intending to use the appliance during an extended period.
• Clean the appliance.
Bekijk gratis de handleiding van Taurus Boreal 16CR Go, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Taurus |
| Model | Boreal 16CR Go |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 7956 MB |
