Tascam FR-AV2 handleiding
Handleiding
Je bekijkt pagina 55 van 72
TASCAM FR-AV2 V1.00 55
14. Remote control functions
14-3. Connecting with the
dedicated control app
1.
Use the smartphone or tablet to launch TASCAM RECORDER
CONNECT.
Bluetooth device screen
2.
If the unit is not turned on, turn it on.
3.
On this unit, set MENU screen > BLUETOOTH >
REMOTE CONTROL to “ON”.
The default value is “OFF”.
The connection status can be checked with the blinking state
of the smartphone icon at the top right of the HOME screen.
Blinking
state
Status
Unlit Not paired
Blinking Waiting to pair
Lit Paired
When connection completes, the display of the smartphone
or tablet will automatically switch to the operation screen.
NOTE
o See the TASCAM RECORDER CONNECT operation manual
for details about using the control app.
o In the control app, this unit will be recognized according to
its MENU screen > BLUETOOTH > BLUETOOTH ID setting.
14-4. Wireless timecode
synchronization with
supported Atomos products
By connecting a Bluetooth adapter (AK-BT2 sold separately)
to the Bluetooth device connector on this unit, connection
with, for example, AtomX SYNC and UltraSync BLUE devices by
Atomos Pty Ltd to receive timecode is possible.
Received timecode is written to the les recorded by this unit.
Using this timecode data simplies the aligning of video and
audio les created by multiple units.
NOTE
o Set MENU screen > TIMECODE > TC GEN MODE to
“BLE MASTER”. (“Timecode selection” on page 57)
Connecting with supported Atomos
products
Remove the cover from the Bluetooth connection device port
and install an AK-BT2 in this unit before conducting the follow-
ing operations.
HOME screen when stopped
e
Press the F1[MENU] button. Select TIMECODE> BLE and
press the F4[ENTER] button.
e
Select BLE • CONNECT and
press the F4[ENTER] button.
After pairing completes,
“CONNECT” will appear
dimmed.
o Pairing operations are also necessary on the Atomos product
being paired. Refer to the operation manual of the device
being used for procedures.
o See “TIMECODE INFORMATION” on page 58 for details
about checking timecode information.
Connecting and disconnecting with
supported Atomos products
Press the F1[MENU] button when the unit is stopped and the
HOME screen is open, and set MENU screen > TIMECODE > BLE
to “OFF”.
Bekijk gratis de handleiding van Tascam FR-AV2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8478 MB |
