Tascam FR-AV2 handleiding
Handleiding
Je bekijkt pagina 30 van 72
30 TASCAM FR-AV2 V1.00
6. Input and output settings
6-1. Making input settings for
each input
HOME screen when stopped
e
Press the F3[INPUT] button. (When stereo linking is o)
NOTE
o When stereo linking is o, use the m and , buttons to
select the channel to set.
o Not all setting items are shown on a single screen. Use the
F2[ ] and F3[ ] buttons to move the selection up and down
and show the necessary items.
o Even though channels are selected to make settings, they
are saved as settings for the input jacks assigned to those
channels. For this reason, even if input source settings are
used to change the assignments of channels and input
jacks, the input jack settings will not change. The stereo link
function is an exception.
Adjusting the recording level (REC
LEVEL)
Select REC LEVEL and press the F4[ENTER] button.
Use the F2[hPARAM] and F3[PARAM7] buttons to adjust
the audio signal level used when recording les.
Options: 0dB (default) – +60.0dB
o While watching the level meter, adjust the REC LEVEL so that
the level averages around −12 dB and the PEAK indicator
does not light.
o The recording sound might distort when the PEAK indicator
lights.
NOTE
o If the input level exceeds –2 dB, the PEAK indicator on the
unit will light.
If an input level exceeds –2 dB, the
PEAK indicator for that input lights
o If an overload occurs with an analog circuit, the entire level
meter will become red.
Since this could cause the recorded audio to become distorted,
make the following adjustments.
• Distance the mic from the sound source.
• Lower the volume of the sound source.
Setting the GANG operation mode (GANG)
Setting the GANG operation mode allows the recording levels of
channels 1 and 2 to be linked and operated simultaneously.
Select GANG and press the F4[ENTER] button to switch the setting.
Options: OFF (default), ON
NOTE
Even if a ganged channel reaches its upper or lower limit
rst, operation of the current channel can continue. In this
case, dierences in levels are remembered by the unit. When
operation of a channel is reversed, level dierences will be
retained when operated.
Bekijk gratis de handleiding van Tascam FR-AV2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8478 MB |
