Handleiding
Je bekijkt pagina 18 van 23
B
C
D
E
VI. SUB XSW8 INSTALLATION
1. AMPLIFIER BOARD
A
VOLUME LEVEL CONTROL
Increases or decreases the volume of your subwoofer.
- If you are using the LFE input of your subwoofer : Set the “VOLUME” knob to mid-range
and then adjust the volume using your Home Theatre amplifier’s settings to your conven-
ience. If necessary, adjust the volume of the subwoofer to balance the sound level set by
your Home Theatre processor.
- If you are using the Left & Right inputs of your subwoofer : Set the “VOLUME” knob to
mid-range and adjust the bass level to achieve the best sound harmony with your system.
A
CROSSOVER CONTROL
Adjust frequency of low pass crossover for good matching with your main speakers.
- If you use the LFE input of your subwoofer with a Home Theatre amplifier, the cutoff
frequency is set directly on its processor. In this case, set the maximum cutoff frequency
on your subwoofer to 150Hz.
- In a stereo configuration and a more “Hi-Fi” listening experience, use lowest frequency
as possible (≤ 80Hz).
B
PHASE INVERT
Changes the phase of the subwoofer so for a perfect match with the main loudspeakers in
the system. (example on page 36)
E
AUTO-ON SENSITIVITY SWITCH
“On” mode: Corresponds to a forced switch-on.
“Auto” mode : When not in use the subwoofer go to standby mode to save power. The
Auto ON Switch dictates the sensitivity level at which the unit will turn ON automatically
(trigger mode).
D
LINE LEVEL INPUT
Connect it to PRE-OUT output your preamplifier or integrated amplifier in stereo mode. For
you home theatre amplifier or processor, use LFE connection.
C
EN
34 35
EN
Bekijk gratis de handleiding van Tangent Spectrum II X5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tangent |
| Model | Spectrum II X5 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1920 MB |